Description
G3™ Pro Grease Lubrication Pump, 90-240 VAC, 8 Liter, Low Level with Controller, DIN
Graco
Graco 96G076 – G3 PRO PUMP,G-ACPR-8L0L00-0D000000
Part Number: 96G076
G3™ Pro Grease Lubrication Pump, 90-240 VAC, 8 Liter, Low Level with Controller, DIN
Additional information
| Manufacturer | Graco |
|---|---|
| Primary UOM Code | EA |
| UPC Code | 633955594548 |
| Model | G3 |
| Application | On-Road Vehicles;Off-Road Equipment |
| Compatible material | Grease |
| For use with | Injector-Based Systems; Series Progressive Systems |
| Alarm Relay Inductive Maximum Operating Voltage | 1.5 A / 250 VAC |
| Alarm Relay Inductive Maximum Switch Capacity | 25 VA;30 W |
| Alarm Relay Inductive Minimum Per Load | 10 ?A;10m VDC |
| Alarm Relay Inductive Rated Load | 0.2 A |
| Alarm Relay Inductive Maximum Operating Current | 3:00 AM |
| Alarm rel re max switch cap | 50 VA;60 W |
| Alarm rel re rated load | 0.4 A |
| Compatible metering device | Series Progressive |
| Control options | Pro |
| Fluid outlet size | 0.25 IN / 6.3500 MM |
| Fluid outlet thread gender | Female |
| Fluid outlet thread type | NPSF |
| Includes | Wiper Arm; Low Level |
| Input impedance | 1.1 |
| Input max off current | 1.5 MA |
| Input max residual voltage | 4 V |
| Input required switch type | Normally Open |
| Input response time | 60 MS |
| Input sensor voltage | 24 VDC |
| Ip rating | IP69K |
| Low level carry current | 1.2 A |
| Low level contact rating | 10 W |
| Low level switch rating | 200 VDC |
| Low level switching current | 0.5 A |
| Max fill inlet pressure | 344.7 BAR / 34470 KPA / 5000 PSI |
| Max nlgi grade | #2 |
| Max run time | 30 Min |
| Max voltage | 264 VAC |
| Max working pressure | 351.6 BAR / 35160 KPA / 35.1 MPA / 5100 PSI |
| Minimum voltage | 88 VAC |
| Num of mach cnt sens inputs | 1 |
| Num of press cyc sens inputs | 3 |
| Number of pump elements | Up to 3 |
| Overall depth | 10 IN / 25.4 CM / 254 MM |
| Overall height | 18.5 IN / 47 CM / 470 MM |
| Overall width | 23.5 CM / 9.25 IN / 235 MM |
| Power connection type | DIN |
| Power type | Electric |
| Product type | Electric Piston Pump |
| Pump output with 0 spacers | 0.25 CU-IN/MIN |
| Pump output with 1 spacer | 0.18 CU-IN/MIN |
| Pump output with 2 spacers | 0.12 CU-IN/MIN |
| Reservoir size | 2.11 GAL / 8 L |
| Voltage | 90-240 VAC |
| Weight | 6 KG / 13.3 LB |
| Wetted material | Nylon;Trogamid T5004-060;Zinc-Plated Steel;Carbon Steel;Alloy Steel;Stainless Steel;Nitrile Rubber;Bronze;Nickel Plated Alnico;Chemically Lubricated Acetal;Aluminum;PTFE;Grillamid |
| Alarm Relay Resistive Maximum Operating Voltage | 250 VAC |
| Alarm rel re min per load | 10 µA;10m VDC |
| Vent valve max op current | 2:00 AM |
| Vent valve max op power | 48 W |
| Vent valve output voltage | 24 VDC |
Related products
-
Graco 563258 – INDICATOR, MANUAL RESET, 2500 PSI, W/O-RING
GracoGracoPart Number: 563258Reset Indicator with Memory, 2500 PSI (172 BAR), 1/8 NPSF with O-Ring for MSP, MXP, and MHH Divider Valves -
Graco 563515 – FILTER, 25 MIC INLINE 1/4-19 BSPP
GracoGracoPart Number: 563515In-Line Oil Filters - High Pressure, 7500 PSI, 1/4-19 in BSPP, 25 Micron -
Graco 563253 – INDICATOR, MANUAL RESET, 500 PSI, W/O-RING
GracoGracoPart Number: 563253Reset Indicator with Memory, 500 PSI (35 BAR), 1/8 NPSF with O-Ring for MSP, MXP, and MHH Divider Valves