Description
G3™ Pro Grease Lubrication Pump, 24 VDC, 2 Liter, Follower Plate, Low Level with Controller, Remote Manual Run, CPC
Graco
Graco 96G012 – G3 PRO PUMP,G-24PR-2LFL00-R0C00000
Part Number: 96G012
G3™ Pro Grease Lubrication Pump, 24 VDC, 2 Liter, Follower Plate, Low Level with Controller, Remote Manual Run, CPC
Additional information
| Manufacturer | Graco |
|---|---|
| Primary UOM Code | EA |
| UPC Code | 633955559011 |
| Model | G3 |
| Application | On-Road Vehicles;Off-Road Equipment |
| Compatible material | Grease |
| For use with | Injector-Based Systems; Series Progressive Systems |
| Alarm Relay Inductive Maximum Operating Voltage | 1.5 A / 220 VDC |
| Alarm Relay Inductive Maximum Switch Capacity | 25 VA;30 W |
| Alarm Relay Inductive Minimum Per Load | 10 ?A;10m VDC |
| Alarm Relay Inductive Rated Load | 1:00 AM |
| Alarm Relay Inductive Maximum Operating Current | 3:00 AM |
| Alarm rel re max switch cap | 50 VA;60 W |
| Alarm rel re rated load | 2:00 AM |
| Compatible metering device | Series Progressive |
| Control options | Pro |
| Fluid outlet size | 0.25 IN / 6.3500 MM |
| Fluid outlet thread gender | Female |
| Fluid outlet thread type | NPSF |
| Includes | M12 Connection for Remote; Follower Plate; Low Level |
| Input cycle rate | 8 HZ |
| Input impedance | 1.1 |
| Input max off current | 1.5 MA |
| Input max residual voltage | 4 V |
| Input required switch type | Normally Open |
| Input response time | 60 MS |
| Input sensor voltage | 24 VDC |
| Ip rating | IP69K |
| Low level carry current | 1.2 A |
| Low level switch rating | 200 VDC |
| Low level switching current | 0.5 A |
| Max fill inlet pressure | 344.7 BAR / 34470 KPA / 5000 PSI |
| Max nlgi grade | #2 |
| Max run time | 30 Min |
| Max voltage | 32 VDC |
| Max working pressure | 351.6 BAR / 35160 KPA / 35.1 MPA / 5100 PSI |
| Minimum voltage | 18 VDC |
| Num of mach cnt sens inputs | 1 |
| Num of press cyc sens inputs | 3 |
| Number of pump elements | Up to 3 |
| Overall depth | 9 IN / 22.9 CM / 229 MM |
| Overall height | 13.25 IN / 33.7 CM / 337 MM |
| Overall width | 20.3 CM / 8 IN / 203 MM |
| Power connection type | CPC |
| Power type | Electric |
| Product type | Electric Piston Pump |
| Pump output with 0 spacers | 0.25 CU-IN/MIN |
| Pump output with 1 spacer | 0.18 CU-IN/MIN |
| Pump output with 2 spacers | 0.12 CU-IN/MIN |
| Reservoir size | 0.528 GAL / 2 L |
| Voltage | 24 VDC |
| Weight | 6 KG / 13.3 LB |
| Wetted material | Nylon;Trogamid T5004-060;Zinc-Plated Steel;Carbon Steel;Alloy Steel;Stainless Steel;Nitrile Rubber;Bronze;Nickel Plated Alnico;Chemically Lubricated Acetal;Aluminum;PTFE;Grillamid |
| Alarm rel re min per load | 10 µA;10m VDC |
| Vent valve max op current | 2:00 AM |
| Vent valve output voltage | 24 VDC |
Related products
-
Graco 563254 – INDICATOR, MANUAL RESET, 750 PSI, W/O-RING
GracoGracoPart Number: 563254Reset Indicator with Memory, 750 PSI (52 BAR), 1/8 NPSF with O-Ring for MSP, MXP, and MHH Divider Valves -
Graco 563261 – INDICATOR, RESET 3000 PSI 1/8 NPSF
GracoGracoPart Number: 563261Reset Indicator with Memory, 3000 PSI (207 BAR), 1/8 NPSF with O-Ring - MH, MS, MXP Divider Valves -
Graco 563240 – INDICATOR, MAN RESET 500 PS MX
GracoGracoPart Number: 563240Reset Indicator with Memory, 500 PSI (35 BAR), 1/4 NPTF - MX Divider Valves Only